High Flow Cartridge Filter Housing
DLLX Series High Flow Cartridge Filter Housing
Material of construction
Stainless Steel 304 or 316L
Inlet / Outlet
ANSI Flange is standard, others are optional
Closure
Bolt and Nut
Finishing
Outer – Polished or sand blast surface
Inner – Polished
Sealing
Silicone / Viton O-ring
Pressure
Maximum 1.0 Mpa
Continuous operating 0.7 Mpa
Cartridges
Can be design to suit Pall or 3M cartridges
Sealing
Silicone / Viton O-ring
Housing Type
Normally housing design in horizontal but can be design in vertical upon request
House Design
To suit 20”, 40”, 60” or other length cartridges
To fit 1 to 50 cartridges or more
Connections
Inlet and outlet sizes and directions can be custom made to suit different requirement
Vent and drain sizes, types can be custom made also
| DLLX Series | No. of Cartridges | Length | Connections | Connection Type | 304 Material | |
|---|---|---|---|---|---|---|
| DLLX | 1 to 50 | 20 = 20″ | 3= 3″ | N = NPT | AF = ANSI Flange | 304 = SUS 304 |
| 40 = 40″ | 4= 4″ | J = JIS | JF = JIS Flange | 316L = SUS 316L | ||
| 60 = 60″ | 5= 5″ | D = DIN | DF = DIN Flange | |||
| 6= 6″ | B = BSP | BF = BS Flange | ||||
| 8= 8″ | ||||||
| 10= 10″ | ||||||