Strainer FIlter Housing DLS Series
DLS Series
Material of construction
Carbon Steel with Inner Epoxy Resin Coated,
Stainless Steel 304 or 316L
Inlet / Outlet
ANSI Flange is standard, others are optional
Closure
Bolt and Nut
Finishing
Outer – Polished or sand blast surface
Inner – Polished
Sealing
Silicone / Viton O-ring
Pressure
Maximum 1.0 Mpa
Continuous operating 0.7 Mpa
Pressure
Maximum 1.0 Mpa
Continuous operating 0.7 Mpa
Strainer Material
Carbon Steel with Inner Epoxy Resin Coated
Stainless Steel 304 or 316L
Strainer Micron Size
Various micron size from 10 micron to 3000 micron
Housing Design
All Strainer Filter Housings are custom design to suit different flow rate and different type of liquid
Connection
Inlet and outlet sizes and directions can be custom made to suit different requirement
Vent and drain sizes, types can be custom made also
| DLS Series | No. of Strainers | Strainers Diameter | Strainer Height | Connections | Connection Type | Material | |
|---|---|---|---|---|---|---|---|
| DLS | 1 to 20 | Various | Various | 2=2″ 3=3″ |
N = NPT | AF = ANSI Flange | CS = Carbon Steel |
| 4=4″ 6=6″ |
J = JIS | JF = JIS Flange | 304 = SUS 304 | ||||
| 8=8″ 10=10″ |
D = DIN | DF = DIN Flange | 316L = SUS 316L | ||||
| 12=12″ | B = BSP | BF = BS Flange | |||||